View The Wi-Fi Status; View Wi-Fi Status Messages On The Phone - Cisco 8800 Series Manual

View the Wi-Fi Status

View the Wi-Fi Status
You can also view the status from the phone web page by selecting User Login > Advanced > Info > Status >
System Information.
Procedure
Step 1
Press Applications
Step 2 Select Network configuration > Wi-Fi configuration > Wi-Fi status.
You see the information:
• Wi-Fi status: Displays if the Wi-Fi is connected or disconnected.
• Network name: Indicates the name of the SSID.
• Signal strength: Indicates strength of the network signal.
• MAC address: Indicates MAC address of the phone.
• AP MAC address: Indicates MAC address of the access point (SSID).
• Channel: Indicated the channel on which the Wi-Fi network transmits and receives data.
• Frequency: Indicates the wireless signal frequency band that is used in the Wireless LAN.
• Security mode: Indicates the security mode that is set for the wireless LAN.

View Wi-Fi Status Messages on the Phone

You can view messages about the Wi-Fi connection status of your phone. The messages can help you diagnose
Wi-Fi connection problems. The messages contain:
• connection time and MAC address of the AP
• disconnection time and diagnostic code
• connection failure time
• time that weak signal of the AP continues over 12 seconds
Procedure
Step 1 Press Applications
Step 2 Select Status > Wi-Fi messages.
Step 3
Use the outer ring of the navigation cluster to scroll through the messages.
Step 4 Press Details to view more details of the selected message.
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
324
.
.
Cisco IP Phone Installation