Configure The Subscriber Information Parameters; Subscriber Information Parameters - Cisco 8800 Series Manual

Configure the Subscriber Information Parameters

Configure the Subscriber Information Parameters
Before you begin
Access the phone administration web page. See
Procedure
Step 1
Select Voice > Ext(n), where n is an extension number.
Step 2 In the Subscriber Information section, set the parameter values as described in the
Parameters, on page 382
Step 3 Click Submit All Changes.

Subscriber Information Parameters

The following table defines the function and usage of the parameters in the RTP Parameters section under the
SIP tab in the phone web interface. It also defines the syntax of the string that is added in the phone
configuration file with XML(cfg.xml) code to configure a parameter.
Table 77: Subscriber Information
Parameter
Display Name
User ID
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
382
Access the Phone Web Interface, on page
table.
Description
Name displayed as the caller ID.
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<Display_Name_1_ ua="na"/>
• In the phone web page, enter a name that
represents the caller ID.
Extension number for this line.
When you need to refer to this user ID in another
setting, for example, the short name for a line key,
use the macro variable.
$USER
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<User_ID_1_ ua="na">7001</User_ID_1_>
• In the phone web page, enter an extension
number
Cisco IP Phone Installation
104.
Subscriber Information