Download Print this page
   

Advertisement

See page 3 for wireless setup
1
Your Phone
1
Incoming call or voicemail indicator
2
Camera (Cisco IP Phone 8845 and 8865)
3
Feature and session buttons
4
Softkeys
5
Back, Navigation cluster, and Release
6
Hold, Transfer, and Conference
7
Headset, Speakerphone, and Mute
8
Voicemail, Applications, and Directory
9
Volume
Copyright © 2015 Cisco Systems, Inc. All rights reserved.
Cisco IP Phone 8800 Series
9
8
Feature and Session Buttons
Use feature buttons (left side) to view calls on a line or
access features such as Speed Dial. Use session buttons
(right side) to perform tasks such as resuming a held call.
If you use a locale that reads right to left, the feature and
session button locations are swapped.
Buttons illuminate to indicate status:
Green, steady: Active call
x
Green, flashing: Held call
x
Amber, steady: Private line in use
x
Amber, flashing: Incoming call
x
Red, steady: Remote line in use
x
Red, flashing: Remote line on hold
x
Make a Call
2
Enter a number and pick up the handset.
Answer a Call
Press the flashing amber line button.
3
Put a Call on Hold
4
1. Press Hold
5
2. To resume a held call, press Hold again.
6
View Your Recent Calls
1. Press Applications
7
2. Select Recents.
3. Select a line to view.
Transfer a Call to Another Person
1. From a call that is not on hold, press Transfer
2. Enter the other person's phone number.
3. Press Transfer again.
Add Another Person to a Call
1. From a connected call that is not on hold, press
2. Press Active calls to select a held call.
3. Press Conference again.

Quick Start Guide

.
.
Conference
.
.
December 2015

Advertisement

   Also See for Cisco 8800 Series

   Related Manuals for Cisco 8800 Series

   Summary of Contents for Cisco 8800 Series

  • Page 1: Quick Start Guide

    Headset, Speakerphone, and Mute 3. Press Conference again. Amber, flashing: Incoming call Voicemail, Applications, and Directory Red, steady: Remote line in use Volume Red, flashing: Remote line on hold Copyright © 2015 Cisco Systems, Inc. All rights reserved. December 2015...

  • Page 2: User Guide

    2. Select Settings > Font Size. 1. Select a line and press Forward all. Cisco and/or its affiliates in the U.S. and other countries. To view a list 3. Select a font size. 2. Dial the number that you want to forward to, or press of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks.

  • Page 3

    CISCO 8865 only Connect to a Wi-Fi Network The Cisco IP Phone 8861 and 8865 can access a Wi-Fi network. To use the phone in a Wi-Fi network, you must use a power adaptor to power the phone. Before You Begin Your administrator needs to configure settings on the call control system to enable Wi-Fi access.

Comments to this Manuals

Symbols: 0
Latest comments: