Cisco 8800 Series Manual page 95

Cisco IP Phone Provisioning
Parameter Name
IP
EXTIP
SWVER
HWVER
PRVST
UPGST
UPGERR
PRVTMR
UPGTMR
REGTMR1
REGTMR2
UPGCOND
SCHEME
SERV
SERVIP
PORT
PATH
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
Macro Expansion Variables
Description and Default Value
IP address of the phone within its local subnet. For
example 192.168.1.100.
External IP of the phone, as seen on the Internet. For
example 66.43.16.52.
Software version string. For example,
sip88xx.11-0-1MPP.
Hardware version string. For example, 2.0.1
Provisioning State (a numeric string):
-1 = explicit resync request
0 = power-up resync
1 = periodic resync
2 = resync failed, retry attempt
Upgrade State (a numeric string):
1 = first upgrade attempt
2 = upgrade failed, retry attempt
Result message (ERR) of previous upgrade attempt;
for example http_get failed.
Seconds since last resync attempt.
Seconds since last upgrade attempt.
Seconds since Line 1 lost registration with SIP server.
Seconds since Line 2 lost registration with SIP server.
Legacy macro name.
File access scheme, one of TFTP, HTTP, or HTTPS,
as obtained after parsing resync or upgrade URL.
Request target server host name, as obtained after
parsing resync or upgrade URL.
Request target server IP address, as obtained after
parsing resync or upgrade URL, possibly following
DNS lookup.
Request target UDP/TCP port, as obtained after
parsing resync or upgrade URL.
Request target file path, as obtained after parsing
resync or upgrade URL.
75