Configure The Sip Timer Values - Cisco 8800 Series Manual

Configure the SIP Timer Values

Parameter
Sip Accept Encoding
SIP IP Preference
Disable Local Name To Header
Configure the SIP Timer Values
Before you begin
Access the phone administration web page. See
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
348
Description
Supports the content-encoding gzip feature.
If gzip is selected, the SIP message header contains the string
"Accept-Encoding: gzip", and the phone is able to process the SIP
message body, which is encoded with the gzip format.
Perform one of the following.
• In the phone configuration file with XML(cfg.xml), enter a string
in this format:
<Sip_Accept_Encoding ua="na">none</Sip_Accept_Encoding>
• In the phone web page, enter an appropriate MIME type for a
SIPINFO message.
Allowed values: none and gzip
Default: none
Sets if the phone uses IPv4 or IPv6.
Perform one of the following.
• In the phone configuration file with XML(cfg.xml), enter a string
in this format:
<SIP_IP_Preference ua="na">IPv4</SIP_IP_Preference>
• In the phone web page, select IPv4 or IPv6.
Allowed values: IPv4/IPv6
Default: IPv4.
Controls the display name in "Directory", "Call History", and in the
"To" header during an outgoing call.
Perform one of the following.
• In the phone configuration file with XML(cfg.xml), enter a string
in this format:
<Disable_Local_Name_To_Header
ua="na">No</Disable_Local_Name_To_Header>
• In the phone web page, select Yes to disable the display name.
Allowed values: Yes/No
Default: No
Access the Phone Web Interface, on page
Cisco IP Phone Installation
104.