Xml Services - Cisco 8800 Series Manual

XML Services

Parameter
Primary NTP Server
Secondary NTP
Server
Use Config TOS
XML Services
The phones provide support for XML services, such as an XML Directory Service or other XML applications.
For XML services, only HTTP and HTTPS support is available.
The following Cisco XML objects are supported:
• CiscoIPPhoneMenu
• CiscoIPPhoneText
• CiscoIPPhoneInput
• CiscoIPPhoneDirectory
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
164
Description and Default Value
IP address or name of the primary NTP server used to synchronize its time.
You can set primary NTP server for both IPv4 and IPv6.
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<Primary_NTP_Server ua="rw">192.168.1.10</Primary_NTP_Server>
• In the phone web interface, specify the IP address or host name of the NTP server.
Default: Blank
IP address or name of the secondary NTP server used to synchronize its time.
You can set primary NTP server for both IPv4 and IPv6.
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<Secondary_NTP_Server ua="rw">192.168.1.11</Secondary_NTP_Server>
• In the phone web interface, specify the IP address or host name of the NTP server.
Default: Blank
This field controls whether the phone uses the Time of Service (TOS) parameters on
the Ext (n) tab. Set this field to Yes when you want the phones to use the TOS
configuration specified on the Ext (n) tab. Otherwise, set this field to No.
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<Use_Config_TOS ua="na">No</Use_Config_TOS>
• In the phone web interface, select Yes or No as needed.
Allowed values: Yes|No
Default: No
Cisco IP Phone Configuration