New And Changed Features For Firmware Release 11.0(1) - Cisco 8800 Series Manual

New and Changed Features for Firmware Release 11.0(1)

Feature
Cisco IP Phone 8845 and 8865 Support
Factory Reset Button in the Phone Web Page
IPv6 Support
Presence
New and Changed Features for Firmware Release 11.0(1)
All new features have been added to
Revision
Added MOS enhancement
Added how to confgure missed call
indication on the Configuration Utility
Page
Added factory reset and pinging in phone
web page with a specific URL
Added information on a star code is added
to Conference hard key from the phone
web page
Logo can be added as boot display
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
18
New or Changed Sections
Configure the Video Codec
Video Configuration
Video Transmit Resolution Setup
Control the Video Bandwidth
Video Configuration
Disable Video Services
Video Configuration
Factory Reset the Phone with the Web UI Button
Factory Reset
Network Configuration Fields
IPv6 Information
Network Settings
IPv6 Settings
Set Up a Phone for Presence
Broadsoft XMPP
Phone Presence Message: Disconnected from Server
Presence Status Doesn't Work
Telephony Features for Cisco IP Phone, on page
Updated Section
See MOS-LQ and MOS-CQ values in Line Call Status
Supplementary Services
Configure Missed Call Indication with the Configuration Utility
Factory Reset the Phone from Phone Web Page
Identify Phone Issues with a URL in the Phone Web Page
Enable Conference Button with a Star Code
Add a Logo as the Boot Display
New and Changed Information
139.