Phone Display Language - Cisco 8800 Series Manual

Daylight Saving Time Examples
Procedure
Step 1
Select Voice > Regional.
Step 2 Set the Daylight Saving Time Enable drop-down list box to Yes.
Step 3
In the Daylight Saving Time Rule field, enter the DST rule. This value affects the time stamp on the CallerID.
Step 4 Click Submit All Changes.
Daylight Saving Time Examples
The following example configures daylight saving time for the U.S, adding one hour starting at midnight on
the first Sunday in April and ending at midnight on the last Sunday of October; add 1 hour (USA, North
America):
start=4/1/7/0:0:0;end=10/31/7/0:0:0;save=1
start=4/1/7;end=10/-1/7;save=1
start=4/1/7/0;end=10/-1/7/0;save=1
The following example configures daylight saving time for Egypt, starting at midnight on the last Sunday in
April and ending at midnight on the last Sunday of September:
start=4/-1/7;end=9/-1/7;save=1 (Egypt)
The following example configures daylight saving time for New Zealand (in version 7.5.1 and higher), starting
at midnight on the first Sunday of October and ending at midnight on the third Sunday of March.
start=10/1/7;end=3/22/7;save=1 (New Zealand)
The following example reflects the new change starting in March. DST starts on the second Sunday in March
and ends on the first Sunday in November:
start=3/8/7/02:0:0;end=11/1/7/02:0:0;save=1
The following example configures the daylight saving time starting on the last Monday (before April 8) and
ending on the first Wednesday (after May 8.)
start=4/-8/1;end=5/8/3;save=1

Phone Display Language

The Cisco IP Phone supports multiple languages for the phone display.
By default, the phone is set up for English. To enable the use of another language, you must set up the dictionary
for the language. For some languages, you must also set up the font for the language.
After the setup is complete, you or your users can specify the desired language for the phone display.
Supported Languages for the Phone Display
On the phone administration web page, go to Admin Login > Advanced > Voice > Regional. In the Language
section, click the Locale drop-down list box to see the supported languages for the phone display.
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
408
Cisco IP Phone Installation