Cisco 8800 Series Manual page 393

Cisco IP Phone Installation
Parameter
User Equal Phone
Call Recording Protocol
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
Parameters for SIP Settings on Extensions
Description
When a tel URL is converted to a SIP URL and the
phone number is represented by the user portion of
the URL, the SIP URL includes the optional :
user=phone parameter (RFC3261). For example:
To: sip:+12325551234@example.com; user=phone
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<User_Equal_Phone_1_
ua="na">Yes</User_Equal_Phone_1_>
• In the phone web page, select Yes to enable this
feature.
Allowed values: Yes|No
Default: No
Determines the type of recording protocol that the
phone uses. Options are:
• SIPINFO
• SIPREC
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<Call_Recording_Protocol_1_
ua="na">SIPREC</Call_Recording_Protocol_1_>
• In the phone web page, select a protocol from
the list.
Allowed values: SIPREC|SIPINFO
Default: SIPREC
373