Add Distinctive Ringtone - Cisco 8800 Series Manual

Cisco IP Phone Configuration
Table 24: Parameters for Ringtone
Parameter
Ring1 to Ring12
Silent Ring Duration

Add Distinctive Ringtone

You can configure the characteristics of each ring tone using a ring tone script. When the phone receives SIP
Alert-INFO message and the message format is correct, then the phone plays the specified ringtone. Otherwise,
the phone plays the default ringtone.
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
Description
Ring tone scripts for various ringtones.
In the phone configuration XML file (cfg.xml), enter
a string in this format:
<!-- Ringtone -->
<Ring1
ua="na">n=Sunrise;w=file://Sunrise.rwb;c=1</Ring1>
<Ring2 ua="na">n=Chirp
1;w=file://chirp1.raw;c=1</Ring2>
<Ring3 ua="na">n=Chirp
2;w=file://chirp2.raw;c=1</Ring3>
<Ring4
ua="na">n=Delight;w=file://Delight.rwb;c=1</Ring4>
<Ring5
ua="na">n=Evolve;w=file://Evolve.rwb;c=1</Ring5>
<Ring6
ua="na">n=Mellow;w=file://Mellow.rwb;c=1</Ring6>
<Ring7
ua="na">n=Mischief;w=file://Mischief.rwb;c=1</Ring7>
<Ring8
ua="na">n=Reflections;w=file://Reflections.rwb;c=1</Ring8>
<Ring9
ua="na">n=Ringer;w=file://Ringer.rwb;c=1</Ring9>
<Ring10
ua="na">n=Ascent;w=file://Ascent.rwb;c=1</Ring10>
<Ring11 ua="na">n=Are you
there;w=file://AreYouThereF.raw;c=1</Ring11>
<Ring12
ua="na">n=Chime;w=file://Chime.raw;c=1</Ring12>
<Silent_Ring_Duration
ua="na">60</Silent_Ring_Duration>
Controls the duration of the silent ring. For example,
if the parameter is set to 20 seconds, the phone plays
the silent ring for 20 seconds then sends 480 response
to INVITE message.
In the phone configuration XML file (cfg.xml), enter
a string in this format: <Ring1
ua="na">n=Sunrise;w=file://Sunrise.rwb;c=1</Ring1>
<Silent_Ring_Duration
ua="na">60</Silent_Ring_Duration>
Add Distinctive Ringtone
175