New And Changed For Firmware Release 11.2(1) - Cisco 8800 Series Manual

New and Changed for Firmware Release 11.2(1)

Revisions
Added a new field in the General table to support the
new parameter" KEM Type" that is added to the
phone web page
Added a troubleshooting scenario for new MPP key
expansion modules—Cisco IP Phone 8851/8861 Key
Expansion Module and Cisco IP Phone 8865 Key
Expansion Module
Add new task to support Wi-Fi management and
Wi-Fi profile
Added a new table to support the new parameter Wi-Fi
Settings that is added to the phone web page
Added a new table to support the new parameter Wi-Fi
Profile (n) that is added to the phone web page
Added a topic of Cisco Headset 500 Series
customization
Added topics to support Cisco Headset 521, 522, 561,
and 562
Added a topic for upgrading Cisco Headset 500 Series
New and Changed for Firmware Release 11.2(1)
Revisions
Updated the topics to support LCD screen does not
honor "ro" and "na" attribute
Added a new topic to support NAPTR
Updated the topics to support NAPTR
Added a new topic to support SIP privacy header
Updated the topic to support SIP privacy header
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
14
New and Changed Information
New and Changed Sections
General
Key Expansion Module Does Not Go Through the
Normal Start Up Process
Turn the Wi-Fi On or Off from the Phone Web
Interface
Set Up a Wi-Fi Profile from the Phone Web Page and
the XML Provisioning Server
Wi-Fi Settings
Wi-Fi Profile(n)
Cisco Headset 500 Series Customization
,
Accessories Overview for Cisco IP Phone 8800 Series
with Multiplatform Firmware
Cisco Headset
Cisco Headset
Set the Upgrade Rule for the Cisco Headset 500 Series
New or Changed Sections
Enable User Access to the Phone Interface Menus
System Configuration
Configure the SIP Transport
Telephony Features for Cisco IP Phone
SIP Settings
Configure a Privacy Header
SIP Settings