Assign A Ringtone To An Extension - Cisco 8800 Series Manual

Cisco IP Phone Configuration
Parameter
Subscription
Expires
Restrict MWI
(Message Waiting
Indicator)
The following table describes the parameters in the Voice > Phone tab of the phone web page.
Table 23: Miscellaneous Line Key Settings
SCA Barge-In
Enable

Assign a Ringtone to an Extension

You can also configure the parameters in the phone configuration file with XML (cfg.xml) code. To configure
each parameter, see the syntax of the string in
Description
Number of seconds before the SIP subscription expires. Before the subscription
expiration, the phone gets NOTIFY messages from the SIP server on the status of the
shared phone extension.
Perform one of the following:
• In the phone web interface, enter the value in seconds.
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<Subscription_Expires_1_ ua="na">3600</Subscription_Expires_1_>
Valid values: An integer from 10 through 65535
Default: 3600 seconds
Indicates the message waiting indicator lights only for messages on private.
Perform one of the following:
• In the phone web interface, select Yes to enable. When enabled the message waiting
indicator lights only for messages on private. Otherwise, select No.
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<Restrict_MWI_1_ ua="na">No</Restrict_MWI_1_>
Valid values: Yes|No
Default: No
Enables the SCA Barge-In.
Perform one of the following:
• In the phone web interface, select Yes to enable. Otherwise, select No.
• In the phone configuration file with XML(cfg.xml), enter a string in this
format:
<SCA_Barge-In-Enable ua="na">No</SCA_Barge-In-Enable>
Valid values: Yes|No
Default: No
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
Parameters for Ringtone, on page
Assign a Ringtone to an Extension
174.
173