Cisco 8800 Series Manual page 364

SIP Parameters
Parameter
Hold Package
Conference Package
RFC 2543 Call Hold
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
344
Description
Enables support for the BroadSoft Hold Package, which lets users place
a call on hold by clicking a button in an external application.
Perform one of the following.
• In the phone configuration file with XML(cfg.xml), enter a string
in this format:
<Hold_Package ua="na">No</Hold_Package>
• In the phone web page, select Yes to enable support for the Hold
Package.
Allowed values: Yes or No
Default: No
Enables support for the BroadSoft Conference Package that enables
users to start a conference call by clicking a button in an external
application.
Perform one of the following.
• In the phone configuration file with XML(cfg.xml), enter a string
in this format:
<Conference_Package ua="na">No</Conference_Package>
• In the phone web page, select Yes or No.
Allowed values: Yes or No
Default: No
If set to yes, unit includes c=0.0.0.0 syntax in SDP when sending a SIP
re-INVITE to the peer to hold the call. If set to no, unit will not include
the c=0.0.0.0 syntax in the SDP. The unit will always include a=sendonly
syntax in the SDP in either case.
Perform one of the following.
• In the phone configuration file with XML(cfg.xml), enter a string
in this format:
<RFC_2543_Call_Hold ua="na">Yes</RFC_2543_Call_Hold>
• In the phone web page, Yes or No.
Allowed values: Yes or No
Default: Yes
Cisco IP Phone Installation