Cisco 8800 Series Manual page 324

Parameters for XSI Phone Service
Parameter
Login User ID
Login Password
SIP Auth ID
SIP Password
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
304
Cisco IP Phone Configuration
Description
BroadSoft User ID of the phone user; for example,
johndoe@xdp.broadsoft.com.
Enter SIP Auth ID when you select Login Credentials
or SIP Credentials for XSI authentication type.
When you choose SIP Auth ID as SIP Credentials,
you must enter Login User ID. Without Login User
ID, the BroadSoft directory will not appear under the
phone Directory list.
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<Login_User_ID
ua="na">username</Login_User_ID>
• In the phone web interface, enter the username
used to authenticate the access to the XSI server.
Default: Empty
Alphanumeric password associated with the User ID.
Enter login password, when you select Login
Credentials for XSI authentication type.
Default: Empty
The registered user ID of the SIP account registered
on the phone.
Enter SIP Auth ID when you select SIP Credentials
for XSI authentication type.
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<SIP_Auth_ID
ua="na">username</SIP_Auth_ID>
• In the phone web interface, enter the username
used to authenticate the access to the XSI server.
Default: Empty
The password of the SIP account registered on the
phone.
Enter SIP password when you select SIP Credentials
for XSI authentication type.