Add Call Park To A Line Key - Cisco 8800 Series Manual

Cisco IP Phone Configuration
Step 2
In the BLF List URI field, enter uri_name@server
The BLF List URI field must have the same value as that configured for the List URI:sip parameter on the
BroadSoft server.
You can also configure this parameter in the configuration file (cfg.xml) by entering a string in this format:
<BLF_List_URI ua="na">uri_name@server</BLF_List_URI>
Step 3 From the BLF List Feature Options drop down list, select prk.
You can also configure this parameter in the configuration file (cfg.xml) by entering a string in this format:
<BLF_List_Feature_Options ua="na">prk</BLF_List_Feature_Options>
The allowed values are blf+sd+cp|prk. The default value is blf+sd+cp.
Note
Step 4
Click Submit All Changes.

Add Call Park to a Line Key

You can add call park to a line key to enable the user to temporarily store and retrieve calls. Call park is
supported on private lines and shared lines.
Before you begin
Access the phone administration web page. See
Procedure
Step 1
Select Voice > Phone.
Step 2 Select a line key.
Step 3
Set the Extensionfield to Disabled.
You can also configure the parameter in the configuration file (cfg.xml). The parameter is line-specific. Enter
a string in the following format:
<Extension_2_ ua="na">Disabled</Extension_2_>
Step 4 In the Extended Function field, enter a string in this format:
For a private line, enter
fnc=prk;sub=$USER@$PROXY;nme=CallPark-Slot1
For a shared line, enter
fnc=prk;sub=$USER@$PROXY;nme=Call-Park1;orbit=<DN of primary line>
where:
• fnc= prk means function=call park
• sub= 999999 is the phone to which the call parks. Replace 999999 with a numbers.
When the BLF List Feature Options field is set to prk, the auto-assigned keys are used only for
the call park function.
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
Access the Phone Web Interface, on page
Add Call Park to a Line Key
104.
159