Parameters For Ringtone - Cisco 8800 Series Manual

Parameters for Ringtone

Before you begin
Access the Phone Web Interface, on page
Procedure
Step 1
Select Voice > Ext(n), where (n) is the number of a phone extension.
Step 2 In the Call Feature Settings section, select the Default Ring parameter from the list or select no ring.
You can also configure this parameter in the configuration file (cfg.xml) by entering a string in this format:
<Default_Ring_3_ ua="rw">1</Default_Ring_3_>
Step 3
Select Voice > Phone.
Step 4 In the Ringtone section, set the Ring(n) and Silent Ring Duration parameters as described in the
for Ringtone, on page 174
Step 5
Click Submit All Changes.
Parameters for Ringtone
The following table describes the parameters for Ringtone.
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
174
104.
table.
Cisco IP Phone Configuration
Parameters