General Purpose Parameters; Macro Expansion Variables - Cisco 8800 Series Manual

Cisco IP Phone Provisioning
Parameter Name
Log Upgrade Success Msg
Log Upgrade Failure Msg
Peer Firmware Sharing
Peer Firmware Sharing Log Server

General Purpose Parameters

The following table defines the function and usage of each parameter in the General Purpose Parameters
section of the Provisioning tab.
Parameter Name
GPP A - GPP P

Macro Expansion Variables

Certain macro variables are recognized within the following provisioning parameters:
Description and Default Value
Syslog message issued after a firmware upgrade attempt completes
successfully.
The default value is $PN $MAC -- Successful upgrade
$SCHEME://$SERVIP:$PORT$PATH -- $ERR
Syslog message issued after a failed firmware upgrade attempt.
The default value is $PN $MAC -- Upgrade failed: $ERR
Enables or disables the Peer Firmware Sharing feature. Select Yes or
No to enable or to disable the feature.
Default: Yes
Indicates the IP address and the port to which the UDP message is sent.
For example: 10.98.76.123:514 where, 10.98.76.123 is the IP address
and 514 is the port number.
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
General Purpose Parameters
Description and Default Value
The general purpose parameters GPP_* are used as
free string registers when configuring the phones to
interact with a particular provisioning server solution.
They can be configured to contain diverse values,
including the following:
• Encryption keys.
• URLs.
• Multistage provisioning status information.
• Post request templates.
• Parameter name alias maps.
• Partial string values, eventually combined into
complete parameter values.
The default value is blank.
73