Vlan Settings Parameters - Cisco 8800 Series Manual

Cisco IP Phone Installation
2. Cisco Discovery Protocol (CDP)
3. VLAN ID (manual)
4. DHCP VLAN Option
Before you begin
• Access the phone administration web page. See
• Disable CDP/LLDP and manual VLAN.
Procedure
Step 1 Select Voice > System.
Step 2
In the VLAN Settings section, configure the parameters as defined in the
page 327
Step 3
Click Submit All Changes.
You can also configure the parameters in the phone configuration file with XML(cfg.xml) code. To configure
each parameter, see the syntax of the string in the

VLAN Settings Parameters

The following table defines the function and usage of each parameter in the VLAN Settings Parameters
section under the System tab in the phone web page. It also defines the syntax of the string that is added in
the phone configuration file with XML(cfg.xml) code to configure a parameter.
Parameter Name
Enable VLAN
table.
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
Access the Phone Web Interface, on page
VLAN Settings Parameters, on
VLAN Settings Parameters, on page 327
Description and Default Value
Controls the VLAN feature.
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<Enable_VLAN ua="rw">No</Enable_VLAN>
• In the phone web interface, set to Yes to enable
VLAN.
The default value is Yes.
VLAN Settings Parameters
104.
table.
327