Vertical Stacking - Festo MPA-L Series Description

1. Overview of components
Sub−base design
Supply duct (1) separated
Exhaust ducts (3) and (5) separated Type: VMPAL−AP−...−T135
Supply channel (1) and exhaust
ducts (3) and (5) separate
Tab. 1/6: Variants of the sub−bases with integrated pressure zone separation

1.5.6 Vertical stacking

Festo P.BE−MPAL−EN en 1008NH
MPA1
Type: VMPAL−AP−...−T1
Type: VMPAL−AP−...−T135
Pressure zone separation of the pilot channels (12) and (14)
is not provided, as on the valve terminal MPA−L the air supply
for the pilot control of the valves is supplied centrally via the
right−hand end plate.
You can fit further pneumatic components to each valve
position between the sub−base and the valve. These vertical
stackings enable you to implement certain additional func
tions as desired.
1−15