REP 2.1.7: Retard Pad
Parts List: 2.1
Removal
1. Perform the following:
a.
REP 1.1: WorkCentre Cover on page 4-3
b. REP 2.1.18: Printer Assembly on page 4-
24
2. Remove the retard pad bracket mounting
screw (Figure 4-9).
Bracket and mounting screw
Figure 4-9 Retard pad and bracket
3. Remove the bracket and spring.
4. Remove the retard pad.
Page 4-10
Replacement
1. Position the Retard Pad in the printer.
2. Position the retard bracket spring as shown in Figure 4-10.
Retard pad
Figure 4-10 Retard pad spring
3. Position the retaining bracket as shown below in Figure 4-11,
and tighten with the mounting screw.
Figure 4-11 Retard pad mounting bracket reinstallation
www.printcopy.info
Spring
Xerox WorkCentre 450c/450cp Service Manual