Load Array (La) - Siemens SINUMERIK 828D Commissioning Manual

Example
REG[0] = HMI_SETPASSWD(4,"MYPWD")
6.3.21

Load Array (LA)

Description
The LA (Load Array) function can be used to load an array from another file.
Programming
Syntax:
Description:
Parameters:
Note
If an array in the current configuration file must be replaced by an array from another
configuration file, then both arrays must have the same name.
Example
DEF VAR2 = (S/*ARR5/"Out"/,"Toggle field")
PRESS(HS5)
LA("ARR5","arrayext.com")
VAR2 = ARR5[0]
END_PRESS
//A(ARR5)
("Out"/"In")
//END
//A(ARR5)
("Above"/"Below"/"Right"/"Left")
//END
SINUMERIK Integrate Run MyScreens
Programming Manual, 10/2015, 6FC5397-3DP40-5BA3
; Result = TRUE if the password has been
changed successfully, otherwise FALSE
(Identifier [, File])
LA
Loads an array from a file
Identifier Name of array to be loaded
File File in which the array is defined
Programming commands
; Extract from file maske.com
; Load array ARR5 from file arrayext.com
; "Above"/"Below"/"Right"/"Left" appears
in the VAR2 toggle field
instead of "Out/In"
; Extract from file arrayext.com
6.3 Functions
133