Details On The Variable Type - Siemens SINUMERIK 828D Commissioning Manual

Identifier.sc = Signal color
Identifier.st = Short text
Identifier.tg = Toggle symbol
Identifier.tt = Tooltip
Identifier .typ = Variable type
Identifier.ur = Update rate
Identifier.ut = Unit text
Identifier.val = Variable value
Identifier.var = System or user variable
Identifier.vld = Variable status
Identifier.wr = Input mode
See also
Extended configuration syntax (Page 36)
5.11

Details on the variable type

Variable type INTEGER
The following extensions for determining the display in the input/output field and the memory
utilization are possible for the "INTEGER" type:
2nd character in the extension data type
Display format
B
D
H
No data
3rd and/or 4th character in the extension data type
Memory utilization
B
W
D
BU
WU
DU
SINUMERIK Integrate Run MyScreens
Programming Manual, 10/2015, 6FC5397-3DP40-5BA3
Binary
Decimal signed
Hexadecimal
Decimal signed
Byte
Word
Double word
Byte, Unsigned
Word, Unsigned
Double word, Unsigned
5.11 Details on the variable type
(sc: signal color)
(st: short text)
(tg: toggle)
(tt: tooltip
(typ: type)
(ur: update rate)
(ut: unit text)
(val: value)
(var: variable)
(vld: validation)
(wr: write)
Variables
75