Language; Load - Siemens SINUMERIK 828D Commissioning Manual

Programming commands
6.2 Methods
See also
FOC variable (Page 85)
6.2.6

LANGUAGE

Description
The LANGUAGE method is run through when the current language has changed for an opened
screen.
Programming
Syntax:
Description:
Parameters:
See also
Variable S_LANG (Page 88)
6.2.7

LOAD

Description
The LOAD method is executed after the variable and softkey definitions (DEF Var1= ...,
HS1= ...) have been interpreted. At this time, the dialog is not yet displayed.
Programming
Syntax:
Description:
Parameters:
Example
LOAD
100
LANGUAGE
<instructions>
END_LANGUAGE
Language
- None -
LOAD
...
END_LOAD
Download
- None -
; Start identifier
Programming Manual, 10/2015, 6FC5397-3DP40-5BA3
SINUMERIK Integrate Run MyScreens