Generate Code (Gc) - Siemens SINUMERIK 828D Commissioning Manual

typedef struct ExtFct* ExtFctStructPtr;
If the external function is to be developed independently of the platform (Windows, Linux), then
it is not permissible to use the keyword __declspec(dllexport). This keyword is only required
under Windows. For instance, the following macro can be used under Qt:
#ifdef Q_WS_WIN
#else
#endif
The function is declared as follows:
If the screens, configured with "Run MyScreens", are used on the NCU and PCU/PC, then the
extension of the binary file must be omitted:
When the absolute path information is omitted, "Run MyScreens" first searches for the binary
file in the configured directory.
6.3.19

Generate code (GC)

Description
The GC (Generate Code) function generates NC code from the OUTPUT method.
Programming
Syntax:
Description:
SINUMERIK Integrate Run MyScreens
Programming Manual, 10/2015, 6FC5397-3DP40-5BA3
char
union CFI_VARIANT
)ExtFctStruct;
#define MY_EXPORT __declspec(dllexport)
#define MY_EXPORT
extern "C" MY_EXPORT void InitConnection
(ExtFctStructPtr FctRet, ExtFctStructPtr FctPar,char cNrFctPar)
FCT InitConnection = ("xyz"/I/R,I,S/I,S)
Identifier"[,"Target file"][,Opt],[Append])
GC("
Generates NC code
Programming commands
cTyp;
value;
6.3 Functions
129