Fig. 10-12: Config Dialog / Dialog Function Tab Page - Siemens Sinumerik 840D sl Function Manual

DNC Plant/DNC Cell (FBDN1)
10 Configuration
Dialog Function tab page / [DIALOGFUNCTION] section
The Dialog Function tab page is the [DIALOGFUNCTION] section of the machine
configuration file. The dialog function parameters are set here.

Fig. 10-12: Config dialog / Dialog Function tab page

Note
The ASCII characters are entered in decimal code (0 ...255).
If a machine is configured with the dialog function, the machine server is started
when the program is started and runs until the program ends.
Examples are available in the sections Dialog programs and Dialog program
responses.
FBDN1/10-184
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
05.07