7
03.04
7.5.3 Reading in data
Ó Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
Function
When reading in archives and files, the following are possible source
areas:
·
A device connected to the RS-232 interface (e.g. PC)
·
A programming device
·
A diskette drive
·
Archive (i.e. the "Archives" directory) in the directory tree
(even if it is not displayed under "Data selection")
·
The NC card (if a flash file system is formatted on the NC
card)
·
When archives are read in, their format (punched tape/PC
format) is recognized automatically.
·
Data with longer file names (> 8 + 3 characters) can be read
in from diskette.
"Services" Operating Area
7.5 Operation
7
7-383