Siemens SINUMERIK 840D Operator's Manual page 4

SINUMERIK® Documentation
Printing history
Brief details of this edition and previous editions are listed below.
The status of each edition is shown by the code in the "Remarks" column.
Status code in the "Remarks" column:
A .... New documentation.
B .... Unrevised reprint with new Order No.
C .... Revised edition with new status.
If factual changes have been made on the page since the last edition, this is indicated by a
new edition coding in the header on that page.
Edition Order No.
02.01 6FC5298-6AF00-0BP0
11.02 6FC5298-6AF00-0BP2
03.04 6FC5298-6AF00-0BP3
This manual is included in the documentation available on CD-ROM (DOCONCD)
Edition Order No.
03.04 6FC5298-7CA00-0BG0
Trademarks
â
SIMATIC , SIMATIC HMI
trademarks of Siemens AG. The other designations in this publication may also be trademarks, the use of
which by third parties may constitute copyright violation
Additional information is available on the Internet under:
http://www.siemens.com/motioncontrol
This documentation was produced with Word V 9.0
and Designer V 7.0.
The reproduction, transmission or use of this document or its contents is not
permitted without express written authority. Therefore we cannot guarantee that
they are completely identical. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a utility model or design,
are reserved.
© Siemens AG, 1995-2004. All rights reserved
6FC5298-6AF00-0BP3
Printed in Germany
â â
, SIMATIC NET , SIROTEC
Remarks
A
C
C
Remarks
C
â â
, SINUMERIK and SIMODRIVE
.
Other functions not described in this documentation might be executable in the
control. This does not, however, represent an obligation to supply such functions
with a new control or when servicing.
We have checked that the contents of this document correspond to the hardware
and software described. Nonetheless, differences might exist and therefore we
cannot guarantee that they are completely identical. The information contained in
this document is, however, reviewed regularly and any necessary changes will be
included in the next edition. We welcome suggestions for improvement.
Subject to change without prior notice.
Siemens Aktiengesellschaft
â
are registered