New Workpiece/Part Program - Siemens SINUMERIK 840D Operator's Manual

6
"Program" Operating Area
6.10 Manage programs

6.10.3 New workpiece/part program

Work-
pieces
Part
programs
Sub-
routines
User
cycles
Clipboard
6-340
Select workpiece/part program
The following subsection describes how you can select workpieces
and part programs in a directory. A selected file can then be called
and edited in the text editor.
Operating sequence
Select workpiece/part program:
·
Workpieces
·
Part programs
·
Subroutines
·
User cycles
· Clipboard
Position the cursor in the directory on the desired file.
For each file, the file name, file type, length, date of creation/last
change are displayed.
You can change the properties of the file display (see Section "Start-
up", "Settings" menu)
Call a part program:
Use the cursor to select a program in the program overview and press
the "Input" key.
The text editor is displayed with the file you have selected.
You can now edit the part program.
Open a workpiece:
The workpiece directory is opened and the programs it contains
displayed on the screen.
Create workpiece directory
You can set up various types of files such as main programs,
initialization files, tool offsets, etc. in the new workpiece directory.
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
6
03.04
Ó Siemens AG, 2004. All rights reserved