Contour Elements - Siemens SINUMERIK 840D Operator's Manual

6
"Program" Operating Area
6.5 Free contour programming

6.5.3 Contour elements

Contour chain
6-280
Function
The elements of the contour and pole, if applicable, are displayed
symbolically in the sequence in which they were programmed in a
contour chain next to the graphic window.
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
6
03.04
Ó Siemens AG, 2004. All rights reserved