R Parameters (Arithmetic Parameters) - Siemens SINUMERIK 840D Operator's Manual

5
"Parameters" Operating Area

5.4 R parameters (arithmetic parameters)

5.4 R parameters (arithmetic parameters)
5.4.1 Function
5.4.2 Editing/deleting/finding R parameters
R
parameters
5-232
Function
Parameters are read and written by programs.
In this operating area, parameters can be altered manually.
Function
The number of channel-specific R parameters is defined
in a machine data.
Range:
R0-999 (dependent on machine data).
There are no gaps in the numbering within the range.
Operating sequence
The "R parameters" window appears.
The channel-specific parameters are displayed.
The vertical softkey bar changes.
You can page up and down using the "Page" keys.
Change parameters:
Position the cursor bar on the appropriate input field and enter the
new values.
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
5
03.04
Ó Siemens AG, 2004. All rights reserved