Siemens SINUMERIK 840D Operator's Manual page 10

0
Preface
Structure of manual
Principle
Supplementary devices
Personnel
Procedure
x
Your SIEMENS 840D or 810D has been designed and constructed
according to state-of-the-art technology and approved safety
regulations and standards.
The applications of SIEMENS controls can be expanded for specific
purposes through the addition of special add-on devices, equipment
and expansions supplied by SIEMENS.
Only properly trained, authorized, reliable personnel must be
allowed to use this equipment. No one without the necessary training
must be allowed to operate the control, even temporarily.
The areas of responsibility assigned to personnel involved in setting
up, operating and maintaining the equipment must be clearly
specified and their compliance verified.
Before the control is started up, it must be ensured that the Operator's
Guides have been read and understood by the personnel responsible.
Operation of this equipment is dependent on continuous monitoring of
the overall technical condition of the control (with a view to identifying
externally visible defects and damage as well as changes in the
operating behavior of the control).
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
0
03.04
Ó Siemens AG, 2004. All rights reserved