Machine Control Panel Keys - Siemens SINUMERIK 840D Operator's Manual

2
03.04
Auto
*
Inc keys
VAR
1 10
1000 10000
Machine functions
MDI
Teach In
JOG
Repos
JOG
Ref Point
Ó Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
Automatic
Control of machine through automatic execution of programs.
You can activate the Inc functions in conjunction with the following
modes:
· "JOG" operating mode
· "MDI/Teach In" operating mode
Inc Var
Incremental feed variable
Incremental traverse with variable increment size (see Parameters
operating area, setting data).
Inc
100
Incremental feed
Incremental traverse with preset increment size of 1, 10, 100, 1000,
10000 increments.
The increment value is evaluated according to the setting in the
machine data.
Teach In
Creation of programs in interactive mode with the machine in
"MDI" mode.
Repos
Repositioning
Reposition, re-approach contour in "JOG" mode.
Ref
Approaching a reference point
Approach the reference point (Ref) in "JOG" mode.
Operator Components/Sequence of Operations

2.4 Machine control panel keys

2
2-41