Siemens SINUMERIK 840D Operator's Manual page 206

5
"Parameters" Operating Area
5.3 Tool management
Symbols /
5-206
Row 9 displays the current tool for channel "HAND". There the current
value of G56 is equal to the reset value (
The G56 reset value is TOWMCS
$SC_WEAR_TRANSFORM is set.
The current tool for channel "REV2" is indicated in row 2. The current
value of G56 on channel "REV2" deviates from the G56 reset value
( ).
Row 11 displays the current tool for channel "HAND". There the
current value of G56 is equal to the reset value (
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
03.04
).
/ and
).
Ó Siemens AG, 2004. All rights reserved
5