Si (Safety Integrated): User Agreement - Siemens SINUMERIK 840D Operator's Manual

4
03.04

4.4.5 SI (Safety Integrated): User agreement

User
agreement
Ó Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
Function
If the option "user agreement" is installed on the NC, you must enable
or disable the function depending on the keyswitch position in
operating mode "Approach reference point".
User enabling can only be granted if keyswitch position 3 or higher is
selected for the keyswitch position.
The displayed values always refer to the machine (MCS).
Operating sequence
"Jog Ref" mode is selected in the "Machine" operating area.
The channel to be referenced is already selected.
Press softkey "User agreement".
The "Confirm machine positions" window is opened.
The machine axes in the MCS are displayed, together with the current
position and a checkbox for activating/deactivating the user
confirmation.
Machine axes that do not need to be referenced are displayed in
reverse video with their current position, but without a checkbox.
Position the cursor on the desired machine axis.
Activate or deactivate user agreement for the selected machine axis
by means of the "Toggle key".
Check whether the axis is referenced. If not, error message "Please
reference axis first" is output. User agreement cannot be activated for
the axis until it has been referenced.
Machine Operating Area
4.4 JOG mode
4-125
4