Siemens SINUMERIK 840D Operator's Manual page 391

7
03.04
Manage
data
Copy
Programs/
data
Clipboard
NC card
Diskette
Paste
Ó Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
Operating sequence
Select softkey "Manage data".
The horizontal and vertical softkey bars change.
Select the source files that you wish to copy.
A second window for the target directory (see title in window) is
opened.
If available, select the target device via the vertical softkeys.
The contents of "Programs/data" are displayed.
The contents of the "Clipboard" directory are displayed.
Archive files or complete directories can be copied from an existing
NC card.
If a diskette drive is installed, you can copy to or from diskette. The
diskette contents are displayed.
Select a target directory.
The source files are copied to the target directory you have selected.
With this copying action in operating area "Services" the names
remain unchanged.
See Section "Copy/Insert" in the "Program" operating area.
"Services" Operating Area
7.6 Manage data
7
7-391