Siemens SINUMERIK 840D Operator's Manual page 308

6
"Program" Operating Area
6.8 Multi-channel step display (option from SW 6.4)
Cursor on synchronization
icon
Additional dialog box
Posit. on
block no.
Cancel
Switching between work
types
Synchron.
display
6-308
If you position the cursor on a synchronization icon additional states
(channel view) are shown by means of the icon's background colors.
Background color
Green:
The channel is affected by this synchronization and synchronization
partner found.
Yellow:
The channel is affected by this synchronization, but at least one of the
specified channel numbers is not registered in the workpiece.DAT file.
Red:
In this channel the partner was not found or the channel for the
synchronization icon which has the focus contains at least one
channel number from workpiece.DAT in which the searched partner(s)
was/were not found.
(Note: Programming must be modified either in the selected channel
(too many/incorrect channel number(s) specified) or in the searched
channel (missing synchronization)).
In addition: Channel affected by this synchronization but the specified
channel number(s) do not match the selected synchronization icon.
The first synchronization that was not found (red) is output in a dialog
box:
Synchronization string, channel, channel to be synchr.
Continue:
Position on block number or press
Cancel softkey
The following transitions between display types are available:
a) When first opened:
No time data available à standardized view
Time data available à time-related view
b) In standardized view:
only change to synchronized view possible.
c) In time-related view:
only change to synchronized view possible.
No change is possible to the standardized view as
the steps and channels already have the correct relation
to one another the time-related view.
d) In synchronized view:
Change to corresponding view if:
No time data available à standardized view
Time data available à time-related view
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
6
03.04
Ó Siemens AG, 2004. All rights reserved