Siemens SINUMERIK 840D Operator's Manual page 401

7
03.04
RS-232
PG
Diskette...
Archive...
NC card
RS-232
PG
Diskette...
Archives ...
NC card
Start
Ó Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
· The device connected to the RS-232 interface
· Programming device
· Floppy disk drive
· "Archives" directory on hard disk
· The contents of the archives directory on the NC card are
displayed.
Enter the name of the new archive file.
The softkey label changes to "Stop". The update archive is set up.
Read in update archive:
The read-in operation commences when you select the source device
connected to the RS-232 interface. The data are read in via:
· A device connected to the RS-232 interface
· A programming device
· The diskette drive
· The "Archives" directory on the hard disk.
· The "Archives" directory on the NC card
Select an archive file under softkeys "Diskette", "Archives" and "NC
card".
Start reading in the archive. The softkey label changes to "Stop".
"Services" Operating Area
7.7 Start-up functions
7
n
7-401