Siemens SINUMERIK 840D Operator's Manual page 342

6
"Program" Operating Area
6.10 Manage programs
New
6-342
Set up programs/data in a workpiece directory
This section explains how you can set up a new file for a part program
or workpiece.
Operating sequence
The current overview of the workpiece directories stored on the NC
appears.
Position the cursor on the required workpiece and open it.
An overview will be displayed listing the data and programs that have
already been created in the workpiece directory. If no data is
available, the program overview is blank.
A dialog box appears when you select softkey "New".
Enter the new file name.
You can also enter the corresponding file type using the "Insert key".
Some of the possible file types are listed below:
File type Meaning
.WPD
.MPF
.SPF
.JOB
.GUD
.IKA
.INI
.UFR
.TOP
.TOA
.TMA
.TEA
.TCM
.STP
.SEA
.RPA
.PRO
.DAT
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
Workpiece
Part program (main program file)
Subroutine (subprogram file)
Job list
Channel user data
Compensation data
Initialization program
Work offset/frame
Tool plan
Tool offsets (tool offset active)
Magazine data
Machine data (testing data active)
Tool plan reformatted (for SINTDI)
MCSE data
Setting data active
Arithmetic parameters
Protection zones
Time calculation
Ó Siemens AG, 2004. All rights reserved
6
03.04