Siemens SINUMERIK 840D Operator's Manual page 233

5
03.04
Delete
area
Delete all
Abort
OK
Find
Ó Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
5.4 R parameters (arithmetic parameters)
Delete parameters:
Displays a screen in which you can specify the R parameter range Rx
to Ry to be deleted.
The entire R parameter range is deleted, i.e. all values are set to "0".
Inputs are discarded.
Deletes the entered R parameter range.
Find parameters:
An input window for a parameter number appears when you press the
"Find" softkey.
Enter the R parameter number you wish to find via the numeric
keypad.
When you press the "Input key", the cursor is automatically positioned
on this parameter if it exists.
Other information
Input and deletion of parameters can be disabled via the keyswitch.
"Parameters" Operating Area
5
5-233