Siemens SINUMERIK 840D Operator's Manual page 284

6
"Program" Operating Area
6.5 Free contour programming
Insert contour element
Accept
element
Delete a contour element
Delete
element
Undoing an input
Abort
6-284
Use the cursor keys to select the contour element behind which you
wish to insert another element.
Then select the contour element to be inserted from the softkey menu.
After you have parameterized the new element, confirm the insert
operation by selecting softkey "Accept element".
Depending on the new state of the contour, the contour elements
below are updated automatically or when the cursor arrow is played
on them. Contour elements that appear after the insertion point and
are not updated are displayed in green in the contour chain.
Use the arrow keys to select the element you wish to delete. The
selected contour symbol and associated contour element in the
programming graphic are highlighted in red. Then press the softkey
"Delete element" and confirm the query.
By selecting softkey "Abort" you return to the basic display, without
transferring the last edited values to the system.
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
6
03.04
Ó Siemens AG, 2004. All rights reserved