Modifying/Changing Tool Data - Siemens SINUMERIK 840D Operator's Manual

5
03.04

5.3.2 Modifying/changing tool data

Tool ma-
nagement
Magazine
list
Tool
list
Working
offset list
Tool
details
Ó Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
Function
You can view and edit the tool data of the tool selected in the lists.
You can edit the following cutting edge data:
· Offset values
· Monitoring data
· User data
Operating sequence
Select softkey "Tool management".
The list configured by the machine manufacturer appears (e.g. the
magazine list). The horizontal and vertical softkey bars change.
Select the appropriate list via softkey:
· "Magazine list"
· "Tool list"
· "Working offset list"
Position the cursor bar on the appropriate tool. The tool is selected.
Notice:
Please ensure that the channel in which the corrections are to
become effective is displayed.
Select softkey "Tool details".
The input screen form for "Tool details" appears.
The vertical softkey bar changes again.
The following functions are available:
· Create new cutting edges
· Modify cutting edge data
· Modify monitoring data
· Modify location-dependent offsets (DL numbers)
· Delete cutting edges
"Parameters" Operating Area
5.3 Tool management
5
5-201