Siemens SINUMERIK 840D Operator's Manual page 228

5
"Parameters" Operating Area
5.3 Tool management
Begin
job function
Select all
Cancel
selection
Loading
Reactivate
5-228
"Load"
Vertical softkeys
All tools in the hit list are selected for job processing.
The selection for job processing is canceled for all tools in the hit list.
"Loading" is initiated for the selected tools. You are prompted to enter
the destination magazine and the load point in a dialog box.
"Reactivate" is initiated for the selected tools. When reactivating of a
tool, the actual monitoring values and the wear are reset. You can use
the INI file (entry n_ReactivatePositioningMode) to specify (for
each filter) whether reactivation is to be carried out "always", "never",
or "on request" with magazine positioning. Depending on the setting,
the dialog box prompts for positioning and the load point as
appropriate to the setting.
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
5
03.04
Ó Siemens AG, 2004. All rights reserved