Set Time/Clock; File Functions - Siemens SINUMERIK 840D Operator's Manual

9
"Startup" Operating Area
9.4 PLC

9.4.2 Set time/clock

Start-up
PLC
Set
date/clock
Accept

9.4.3 File functions

9-448
Function
You can change the date and time of the PLC and synchronize the
date and time of the PLC and HMI.
Operating sequence
The operating area The operating area "Start-up" is selected.
Select softkey "PLC".
The horizontal and vertical softkey bars change.
Press the softkey "Set date/clock", the window "Set date/clock" is
displayed.
Enter the correct values in the input fields.
The date and time on the HMI are transferred to the PLC.
The performed synchronization can be verified in the "Current:" input
field.
See /IAM/, IM4: Installation and Start-Up Guide HMI/MMC
The values set are retained when the software is rebooted.
Enter the name of the file in which you wish to save the operands.
You can select existing back-up files from a list.
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
9
03.04
Ó Siemens AG, 2004. All rights reserved