Section By Section Simulation - Siemens SINUMERIK 840D Operator's Manual

6
"Program" Operating Area
6.9 Program simulation
Color palettes for
tool path
Channel assignment of
color palettes
Planes for color
classification
Settings

6.9.5 Section by section simulation

6-330
Two freely definable color palettes are available for tool paths for
differentiating between feedrate and rapid traverse movements.
In each color palette it is possible to differentiate between different
basic tool types (without tools, drilling tools, milling tools, turning
tools, threading tools, special tools), to allow differentiation for path
visualization.
One of the two tool type specific color palettes can be freely
assigned to each of the required simulation channels.
In the case of milling/drilling, the available colors are assigned to the
defined cutting depth range. The default value is the thickness of the
blank.
Additional note
The default values can be modified according to the manufacturer's
Load
standard
needs if a valid password is entered. The new values are then globally
Change valid for all new workpieces.
default
A procedure in which first the individual sections of a program are
optimized one after the other without collision consideration is the
preferred method for testing part programs graphically.
Section by section simulation allows the user to go to the individual
section of the program via reference points (using block search).
The reference points are always defined by path markers (program
labels).
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
6
03.04
Ó Siemens AG, 2004. All rights reserved