Siemens SINUMERIK 840D Operator's Manual page 212

5
"Parameters" Operating Area
5.3 Tool management
normal
large
oversize
normal and
heavy
Find empty
location
To loading
point
Tool
details
Abort
Start
5-212
· "Normal" (name configured by machine manufacturer)
· "Large" (name configured by machine manufacturer)
· "Oversize" (name configured by machine manufacturer)
· "Normal and heavy" (name configured by machine manufacturer)
The system searches for a suitable empty location.
The cursor bar is automatically positioned on the magazine location
found in the "Magazine list".
Search via the "Find empty location" softkey
Enter the "Tool size" and "Location type" in the dialog box.
If more than one loading point is configured, select the desired loading
point from a query window.
The system searches for the corresponding empty location.
The cursor bar is automatically positioned on the magazine location
found in the "Magazine list".
Search via the "To loading point" softkey
You have found an empty location in front of the current loading point.
When you press "To loading point" the cursor is automatically
positioned at this location.
Enter data
If the desired empty location is found after a search operation, the
system switches to edit mode and the softkey bar changes. When you
search for an empty location manually, the system switches to edit
mode as soon as you start entering the data on the keyboard.
You can use the "Tool details" display to edit the data of the tool to be
loaded (if necessary).
If the tool has not yet been created, it is created automatically when
you call up the input screen form.
Load/input mode is canceled.
A tool created via "Tool details" or "Start" is deleted. You can search
for another empty location.
The loading operation is initiated. If the tool has not yet been created,
it is created automatically.
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
5
03.04
Ó Siemens AG, 2004. All rights reserved