Status Of Synchronized Actions - Siemens SINUMERIK 840D Operator's Manual

4
Machine Operating Area
4.2 General functions and displays

4.2.9 Status of synchronized actions

Synchron.
actions
4-110
Function
Status information (such as "enabled", "disabled", etc.) can be
displayed here to support start-up of synchronized actions.
References: /PGA/, Programming Guide Advanced, Chapter
"Synchronized Actions"
Operating sequence
"AUTO"/"MDI"/"Jog" mode is selected in the "Machine" operating
area.
Press the ETC key followed by
the "Synchron. actions" softkey.
The display "Status of synchronized actions" appears.
Status of synchronized actions
Current block
+ X 900.000 mm 0.000
+X900.000mm0.000
- Y -156.000 mm 0.000
N100 X100
-Y-156.000mm0.000
+ Z N200 X200 230.000 mm 0.000
+Z230.000mm0.000
N300 X0
Programmed synchronized actions
N100 Ids=1
N129 Ids=2
N100 ID=3
N1000
The display shows:
· "Current block" column:
the current extract of the selected program:
preceding, current and following block
· Column "Programmed synchronized actions":
The programmed synchronized actions are listed block by block
with block number
(static/modal actions are listed together with the number of the
synchronized action)
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
Status Block no. SPF
enabled
N111
disabled
enabled
Ó Siemens AG, 2004. All rights reserved
4
03.04
Search in
program