Defining And Activating User Data (Gud) - Siemens SINUMERIK 840D Operator's Manual

Hmi advanced
Hide thumbs Also See for SINUMERIK 840D:
Table of Contents

Advertisement

7
03.04

7.6.7 Defining and activating user data (GUD)

OK
Abort
Ó Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
Other information
· No check is made to determine whether or not the file contents
may be stored under the new file type!
· The contents of a file are not altered when the file type is
converted.
· All data types may be stored in the "Clipboard" directory.
· In SW 6.3 and higher, the file type is displayed in the properties
window for network drives or disk, and the extension with 0 to 3
letters can be modified in the "Type" input field.
Function
Create a definition file for user data:
· In the "Services" operating area using the softkey "Manage
data"
· In the "Definitions" directory
Procedure
If a definition file is edited in the NC, when exiting the Editor you are
prompted whether the definitions are to be set active.
Example:
"Do you want to activate the definitions from file GUD7.DEF?"
"OK" à
A query is displayed asking if the currently active
data should be saved. "Do you want to save the
previous data for the definitions?"
"OK" à
The GUD blocks for the definition
file to be edited are saved, the new definitions
are activated and the saved data are
reloaded.
"Abort" à The new definitions are activated, the old ones
are lost.
"Abort" à
The changes to the definition file are rejected, the
associated data block is not altered.
Unload
If a definition file is unloaded, the associated data block is deleted
after a query is displayed.
"Services" Operating Area
7.6 Manage data
7
7-395

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sinumerik 840diSinumerik 810d

Table of Contents