Siemens SINUMERIK 840D Operator's Manual page 369
Hmi advanced
Hide thumbs
Also See for SINUMERIK 840D:
- Function manual (920 pages) ,
- Diagnostics manual (714 pages) ,
- Operating turning (713 pages)
Table of Contents
Advertisement
7
03.04
%
File names
Examples:
;$PATH=
Path names
Example:
<Trailer>
Ó Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Operator's Guide HMI Advanced (BAD) – 03.04 Edition
7.3 Formats for saving and importing data
Identifier positioned in front of a file name.
The identifier must be positioned in the first column of the relevant line
(at beginning of block).
1. File names can contain the characters
0...9, A...Z, a...z or _ and must not exceed 24 characters.
2 File names must have a 3-character extension
(_xxx).
3 Data in punch tape format can be generated externally or
processed with an editor. The file name of a file stored internally in
the NC memory starts with "_N_".
A file in punch tape format begins with %<name>, "%" must
appear in the first column of the first line.
%_N_SHAFT123_MPF = Part program SHAFT123 or
%Flange3_MPF
Path statement; identifier in front of a path name.
The path statement must always be programmed as the next block
after the file name.
The ";" character in the path statement must be positioned in the first
column of the relevant line (at beginning of block).
1. Path names end in
_DIR (directories) or _WPD (workpieces).
2. Path name can contain the characters
0...9, A...Z, a...z or _.
3. Paths must be specified absolutely (starting with "/"). "/"). The
separator for the directory hierarchy is "/".
4. A path in punch tape format begins with ;$PATH=<path name> in
the first column of the program.
Path names in punched tape format start with
_N_ and end in _DIR (any directory) or _WPD (workpiece
directory).
;$PATH=/_N_WKS_DIR/_N_SPIGOT_WPD
Workpiece directory SPIGOT in Workpiece directory
The data listed after the file name/path name belong to the file with
the name specified after "%" in the directory specified after ";$PATH=".
Any information (characters with ANSI values < ANSI value 32 (blank)
and not equal to ANSI value 10 (0x0A)) which is not part of the useful
tape data.
"Services" Operating Area
= Part program Flange3
7
7-369
Advertisement
Chapters
Table of Contents
