Tool Offset For Grinding Operations; Structure Of Tool Data - Siemens SINUMERIK 840D sl Function Manual

W4: Grinding-specific tool offset and monitoring functions - only 840D sl

18.2 Tool offset for grinding operations

18.2 Tool offset for grinding operations
18.2
18.2.1

Structure of tool data

Grinding tools
Grinding tools are tools of types 400 to 499.
Tool offset for grinding tools
Grinding tools normally have specific tool and dresser data in addition to cutting edge data.
The specific grinding wheel data for the left and right wheel geometry can be stored under a
T number in D1 and D2.
If data are needed for the dresser geometry, they can be stored, e.g., starting at D3 of a
T number or in additional cutting-edge-specific data
(MD18096 $MN_MM_NUM_CC_TOA_PARAM).
Example 1:
976
Function Manual, 09/2009, 6FC5397-1BP20-0BA0
Extended Functions