3 Operating Sequences
3.1.4 Tool offset
3.1.4.4 Integrated tool management
The "Integrated tool management " function is an
3.1.4.5 Input of tool data
The "Integrated tool management" function is required for the "Input of
Sequence of operation
TOOL
OFFSET
((Bild 810M/63 einmontieren))
TOOL
DATA
3-12
ordering data option.
tool data" function.
Press the "TOOL OFFSET" softkey.
This display then appears on the
screen.
Press the "TOOL DATA" softkey.
© Siemens AG 1990 All Rights Reserved
09.91
6ZB5 410-0EQ02
SINUMERIK 810M, GA3 (BN)